| CAS No.: | None |
|---|---|
| Formula: | None |
| EINECS: | None |
| Bonding Function: | Structural Adhesive |
| Morphology: | Solid-State |
| Application: | Automobile, Construction |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Neutral Silicone Sealant HM-SS9102 | ||
| Sealant properties before curing | ||
| chemical system | Deoxime type silicone sealant | |
| Curing method | Moisture cure | |
| Color | Semitransparent | |
| Appearance | Thixotropic paste | |
| Density (g/cm3) | 1.01 | |
| Surface drying time (min) | 10 | |
| Curing depth (mm, 24h) | 2.4 | |
| Properties after curing | ||
| Hardness (Shore A) | 25 | |
| Product Description: |
| SS9102 is a hygroscopic curing silicone adhesive sealant, deoxime type, low odor, solvent-free. Excellent weather resistance and electrical performance; excellent performance in insulation, thermal cycle, moisture-heat, moisture-freeze, etc. |
| Typical Applications: |
| Used for sealing and waterproofing of electrical equipment |
| Product Performance Characteristics: |
| One component, solvent-free |
| Excellent sizing process performance |
| Excellent water resistance and weather resistance |
| Excellent electrical insulation properties |
| Instructions |
| In order to obtain the best performance, the bonding surface should be clean and free of grease and dust. Cleaning agent can be used to clean the protective interface to be bonded. |
| Before opening the container, it is recommended to allow the product to reach room temperature, otherwise condensation may occur and affect the performance of the product. |
| When applying manual glue, cut the glue nozzle to the appropriate size as required, install it into a handheld manual or pneumatic glue gun, and evenly apply an appropriate amount of silicone on one of the mating surfaces to ensure a continuous closed glue line. If automated equipment is used to apply glue, set the appropriate equipment parameters to apply the glue evenly and continuously to the protective surface. |
| After applying glue, immediately bring the two combined workpieces together for assembly. The excess glue squeezed out can be easily wiped off with a rag. |
| It is recommended to use it once after opening the original package. If it is not used up before using it again, remove the cured part before continuing to use it. |
| Storage Method and Shelf Life: |
| Store in a cool and dry place out of direct sunlight and avoid contact with moisture. Storage temperature 5-28ºC, shelf life is 12 months. |
Nanjing Howell New Materials Technology Co., Ltd.
Room 501, Unit 7, Xingzhihui, Xinghuo Rd 19th, Jiangbei New District, Nanjing, (211899), Jiangsu, China.
American Warehouse:Add: 1006 CROCKER RD, DOOR E5, WESTLAKE, OH 44145
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}