| Customization: | Available |
|---|---|
| Bonding Function: | Structural Adhesive |
| Morphology: | Solid-State |
|
Still deciding? Get samples of US$ 50/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
MS2106 is a silane-modified polyether sealant (MS sealant), which is a moisture-curable elastic sealant, elastic structural adhesive, and sealing coating. The moisture mainly comes from the air. MS2106 not only has excellent environmental performance, but also has excellent bonding to different substrates. Compared with traditional sealants and adhesives such as silicone and polyurethane, it has many excellent properties such as solvent-free, low VOC, no free isocyanate, surface paintable, and no bubbles in the curing process. It is especially suitable for construction, industry, transportation, and new energy. and other fields.
1. No formaldehyde, no odor,solvent-free
2. Quick positioning and strong adhesion
3. Good durability and anti-aging
4. Strong paint ability and non-corrosive
| Raw material | MS- Polymer |
| Appearance | White/Black/Gray |
| Curing mechanism | Moisture curing |
| Tack free time | About 25-40 min |
| Curing speed(*) (20ºC/65% R.V.) | / |
| Hardness (DIN 53505) | 40 Shore A |
| Density (DIN 53479) | 1.52-1.55 g/cm3 |
| Tear strength(DIN 53504) | 1.94 |
| Elongation at break(DIN 53504) | 350 % |
| (*) These values will vary with environmental factors such as temperature, humidity and bonding materials. | |
1. High-grade aluminum profile door and window sealing
2. Marble curtain wall bonding and caulking
3. Aluminum plastic panel curtain wall bonding and caulking
4. Building interior decoration
5. Bonding and sealing of automobiles, ships, elevators, cold storage, etc.
Packaging:
Packaging specifications: 310ml/piece, 24 pieces/box 600ml/soft bag, 20 pieces/box
Storage and Shelf Life:
Storage conditions: Store in a cool, dry place at 8-28°C. Storage period: 9 months Precautions: Store away from children. If it accidentally comes into contact with skin, wipe it with a cloth and rinse with clean water before it solidifies. In case of accidental contact with eyes, rinse immediately with water. It is recommended to use it in a well-ventilated area.
Construction: Cut the branch opening, put on the glue nozzle, cut the glue nozzle into a suitable slope, and apply it to the construction site with a glue extrusion gun. During pneumatic gluing, the air pressure is recommended not to exceed 0.4 MPao, and the construction temperature is recommended to be 4°C - 40°C.
Curing: Place the glued parts in the air. After the skin is formed, it will cure from the surface to the inside. The curing depth will be 2~4mm within 24 hours at room temperature and 55% relative humidity. As time goes by, the curing depth gradually increases.
Storage: Unused glue should be tightened immediately and the nozzle should be sealed for storage. When using it again, if there is a little crust on the seal, just remove it and it will not affect normal use. During the storage process, a small amount of crusting may also appear on the branch mouth. After removal, it can be used normally without affecting product performance.
Nanjing Howell New Material Technology Co., Ltd.
Room 501, Unit 7, Xingzhihui, Xinghuo Rd 19th, Jiangbei New District, Nanjing, (210000), Jiangsu, China.
American Warehouse:Add: 1006 CROCKER RD, DOOR E5, WESTLAKE, OH 44145
){kind=link}