| Customization: | Available |
|---|---|
| Bonding Function: | Structural Adhesive |
| Morphology: | Solid-State |
|
Still deciding? Get samples of US$ 50/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. It is a one part neutral curing sealant, with high performance and good long-term mildew resistance, unaffected by temperature extreme and very good weather ability.
2. The product has capable of repeated extension and compression during service with excellent resistance to aging, shrinkage, cracking and discoloration.
3. It has excellent adhesion to most materials and is widely used.
1. Non-sag, easy to use
2. Anti-Mold
3. Excellent water resistance
4. Excellent weatherproofing properties
5. Low Odor
| Raw material | / |
| Appearance | Fine, uniform paste without bubbles, crusts, gels |
| Tack free time | About 5 min |
| Curing speed(*) (20ºC/65% R.V.) | 2.5 mm/24h |
| Hardness | 24 Shore A |
| Density | 0.96 g/cm3 |
| Elongation at break | 880 % |
| Solid Content | 64.5% |
| Leveling | 0 |
| Curing Depth(7d) | 6.0mm |
| Tensile Strength | 0.83Mpa |
| (*) These values will vary with environmental factors such as temperature, humidity and bonding materials. | |
1. It is widely used in building & family decoration for joints adhesion and sealing which high quality sealant is needed.
2. Suitable for the joint of glass door and window system and stainless steel material, and kitchen, bathroom, greenhouse, balcony and other scenes.
Packaging:
White, Black Different colors are available.
300ml, 600ml Different packages are available.
Storage and Shelf Life:
12 months in unopened packaging in a cool and dry storage place at temperatures between +5ºC and 27ºC, humidity between 30% and 70%. Optimal storage is at the lower half of this temperature range and humidity range. To prevent contamination of unused product, do not return any material to its original container.
1. Cleanse with a cleaning agent, to keep the substrate surfaces completely clean.
2. Use the sealant after cleaning agent dries, around 1~2mins later. You can use two different cloth, one for cleaning agent, and the other for sealant. 3. For better appearance, cover outside of joint areas with masking taps before application.
4. Tool immediately after sealant application, make it smooth and remove masking tape before sealant skins.
Nanjing Howell New Material Technology Co., Ltd.
Room 501, Unit 7, Xingzhihui, Xinghuo Rd 19th, Jiangbei New District, Nanjing, (210000), Jiangsu, China.
American Warehouse:Add: 1006 CROCKER RD, DOOR E5, WESTLAKE, OH 44145
){kind=link}