Low Modulus Oxime Cure Silicone Sealant for Doors Windows and Materials

• Customization: Available
• Application: Construction
• Bonding Function: Bonding & Sealing
• Model NO.: HM-WR30
• Color: White or Others
• Composition: Organic Material
• Morphology: Smooth Paste
• Type: Oxime
• Component: One component
• Curing: Neutral Curing
• Feature: Fast curing
• OEM: Available
• Transport Package: 85ml 300ml 600ml
• Specification: Box
• Trademark: Howell
• Origin: China
• HS Code: 3506100010
• Production Capacity: 100000-1000000 Pieces

Product Description

Product Description

Product Description

HM-WR30 neutral silicone sealant is a one-component, neutral curing silicone sealant rubber that has good adhesion to various building materials without primer. 

Property	Value
Density	1.47±0.02
Tack-free Time (min)	≤60
Curing Speed (mm/24h)	≥2
Tensile Strength (MPa)	≥0.7
Hardness (Shore A)	40
Elongation at Break (%)	200
Grade	12.5E

USAGE

It cannot be used for structural assembly
Do not use on surfaces where plasticizers or solvents may leak out, as this may cause damage to the sealant
It is not recommended to use it in a completely sealed space, which will cause it to not be able to cure completely due to lack of moisture
It is not recommended to use it in places that have been immersed in water for a long time
It is not recommended for structural surfaces that will come into direct contact with food
It is not recommended to use it on medical devices.

1. Cleaning of substrate surface

(1) The purpose of surface treatment before bonding is to remove oil, dust, surface damage and loose natural oxide film on the surface of the base material during the production and transportation process, so as to roughen the surface of the base material and form a surface suitable for mechanism embedding. morphology, while improving surface chemical properties and improving durability under the influence of stress environmental factors.

(2) Cleaning solvents are usually isopropyl alcohol, methyl ethyl ketone, and xylene. The cleaning cloth should be white, clean, soft, non-linting cotton.

(3) Use the "double cloth wiping" method to clean the surface of the substrate. Soak a clean cloth with solvent. Wipe the surface of the substrate in only one direction. Before the solvent evaporates, immediately use a second cloth with a clean dry surface. Wipe the solvent off the surface of the substrate.

(4) Do not put the soaking rag into the container for soaking, otherwise the clean solvent will be contaminated and the cleaning effect will be affected.

(5) Only clean the bonding and sealing construction part within 1 hour each time. Do not expose the cleaned substrate surface to the air for too long.

2. Make a bet
Use plastic tape to cover the surface near the interface to ensure that the sealing working lines are perfectly neat.
Cut the mouth of the hose, install the pointed tube, and then cut it at a 45° angle according to the size of the gap.
Install the sealant gun and press out the sealant along the gap at a 45° angle to ensure that the sealant is in close contact with the surface of the base material. When the joint width is greater than 15 mm, sealant needs to be applied multiple times. After gluing, trim the surface with a knife to remove excess sealant, then tear off the tape. If there are stains, use a damp cloth to remove them.

3. Pad material
Open-cell polyurethane or closed-cell polyethylene foam padding rods and polyethylene materials are recommended lining materials. Prevent sealant from sticking on three sides.

After Sales Service

Standard Warranty: 12 months 
Storage: Store the original sealed adhesive in a dry place with a temperature not exceeding 27 degrees.
Package: 300ml/cartridge with 24 pieces per carton  
                  500ml soft film packaging, 20 pieces/box
                  200L/Iron drum
Other: OEM available

Typical Applications
Sealing and caulking applications between various metal and aluminum alloy doors,windows and walls.
Other general purpose caulking and waterproof sealing.

Main Products

OEM Service

Company Profile

Certifications

Client Visit & Exhibitions

Packaging & Shipping

FAQ

Q: What applications do your sealant products have?
A: Our sealant products have applications across various industries and in different areas. Here are a few examples:

Construction Industry: Our sealants are commonly used in construction for sealing gaps, joints, and cracks in buildings.They help in weatherproofing, waterproofing, and improving the structural integrity of constructions.

Automotive Industry: In the automotive industry, our sealants find application in manufacturing and assembly processes. They are used for sealing gaps, preventing leaks, reducing vibration and noise in vehicles.
 
Q: What distinguishes your sealant products from others in the market?
A: Our sealant products are known for their high quality and exceptional performance. They are formulated with advanced technologies that provide excellent adhesion, elasticity, and durability. Our sealants also exhibit strong resistance to weathering, UV radiation, temperature changes, and chemical exposure. 
 
Q: Can your sealant products be customized for specific project needs?
A: Yes, we understand that different construction projects may have unique requirements. We offer customization options for our sealant products to meet specific project needs. This includes variations in color, viscosity, curing time, and other properties. 
 
Q: Can I request a free sample of your sealant product?
A: Absolutely! We understand the importance of evaluating the product before making a purchase decision.         
We offer free samples of our sealant products. However, please note that our company's policy may require you to cover the shipping cost for the sample initially. Once you proceed with placing an order, we will refund the shipping cost as a gesture of goodwill and appreciation for your business.