Anti-aging Automobile Neutral Silicone sealant

• Customization: Available
• CAS No.: None
• Formula: None
• EINECS: None
• Bonding Function: Instant Adhesive
• Morphology: Solid-State
• Application: Automobile
• Classification: Room Curing
• Characteristic: Neutral Sealant
• Color: Black/Grey/Silver grey/Silver black
• Transport Package: 70ml/ Box
• Specification: N/M
• Trademark: Howell
• Origin: China
• HS Code: 3506100010
• Production Capacity: 100000-1000000 Pieces

Product Description

Automobile Neutral Silicone HM-SS5549
1. Before curing
Items	Typical Value	Test Std.
Sagging (mm)	0	GB/T13477.5-2003
Surface drying time (h)	≤2	GB/T13477.5-2003
Depth curing rate	2 mm/day
Complete curing time (humidity 50±5%, temperature 23±2ºC)	14-21 days
2. After curing for 21 days under conditions of humidity 50±5%, temperature 23±2ºC
Hardness (Shore A	35	GB/T531
Tensile modulus at 25% elongation (MPa)	0.16	GB/T13477.8-2003
Tensile modulus at 50% elongation (MPa)	0.36	GB/T13477.8-2003
Tensile modulus at 100% elongation (MPa)	No break
Ultimate tensile modulus (MPa)	1.2	GB/T 13477.8-2003
Ultimate elongation%	400	GB/T13477.8-2003
Grade of sealant	25HM	ISO 11600 or JC/T881-884-2001
Notes: *a, Conditioning, specimen is conditioned under (23±2) ºC, (50±5)% relative humidity if not specified; *b, Testing Condition, specimen is tested at (23±2) ºC, (50±5)% relative humidity if not specified;;*c, Substrate
*d, Others need to be specified.
The above data is intended to provide guidance for use and should not be used to write product specifications.

PRODUCT DESCRIPTION 

HM-SS5549 silicone weather-resistant adhesive for construction is a kind of one-component, neutral curing, low modulus, high elasticity silicone rubber; it has good elasticity and displacement deformation ability, and has good adhesion to various powder coating metals. The thixotropy of the product prevents it from sagging when it is applied in building joints, so it is especially suitable for the design of non-structural bonding, weather resistance, and waterproof sealing of various curtain walls; at the same time, it can be used in a wide range of climate temperatures. It can be used, and it has good adhesion and compatibility to the surface of most substrates without primer. After curing, it is anti-aging, anti-ultraviolet radiation and extreme high and low temperature (-50-150°C) changes; it has Low modulus performance, can bear the expansion and displacement capacity of the interface ± 25%, can be widely used in bonding and sealing.

FEATURES

1. Anti-aging

2. Anti-ultraviolet radiation

3. Extreme high and low temperature (-50-150°C) changes

4. Low modulus performance

 

APPLICATION

1. Application of glass curtain wall, aluminum-plastic panel curtain wall, door and window sealing and caulking.

2. Non-structural adhesive assembly application of various curtain walls.

3. ation of sealing and caulking between various metal and aluminum alloy doors, windows and walls.
4.Glass, coated glass, tiles and masonry, concrete, etc.
5.Wood that does not seep oil.

 

RESTRICTIONS

APPLICATION TEMPERATURE: +5ºC to +45ºC 

1. Cannot be used for structural assembly.

2. Cannot be used on the surface that will seep plasticizer or solvent, which may cause permanent damage to the sealant.

3. It is not recommended to be used in a completely sealed space, because it will not be fully cured due to lack of of water vapor.

4. Not recommended for long-term immersion in water.
5. It is not recommended to be used on structural surfaces that will directly contact food.
6. It is not recommended to be used on medical.

 

STORAGE AND SHELF LIFE

Store the original sealed adhesive in a dry place with a temperature not exceeding 27 degrees.
The storage period is 12 months from the date of production.

 

COLOR AND PACKAGE

Silver Black

Different colours are available. 

70ml aluminum tube paper card plastic seal, 50m1 syringe with TDS12 / small box, 12 boxes/box

 

SAFETY 

Keep out of reach of children. Before operation, please carefully read the specifications of products and material, and instructions on 

the package of container. 

For more information about safety, please

Company Profile

Nanjing Howell New Materials Technology Co., Ltd.
Room 501, Unit 7, Xingzhihui, Xinghuo Rd 19th, Jiangbei New District, Nanjing, (211899), Jiangsu, China.
  
American Warehouse:Add: 1006 CROCKER RD, DOOR E5, WESTLAKE, OH 44145