Modified Silane Sealant safe and non-toxic after curing

• Customization: Available
• CAS No.: N/A
• Formula: N/A
• Model NO.: HM-MS7107
• EINECS: N/A
• Bonding Function: Instant Adhesive
• Morphology: Solid-State
• Application: Automobile, Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing
• Material: Silicone
• Classification: Room Curing
• Main Agent Composition: Rubber
• Characteristic: Weatherability
• Promoter Composition: Curing Agent
• Composition: Organic Material
• Color: White
• Transport Package: Box
• Specification: N/A
• Trademark: Howell
• Origin: China
• Production Capacity: 100000

Product Description

Description

MS7107 is a high performance, neutral one-part adhesive/sealant based on MS-polymer. It reacts with moisture to form an elastic material, and its surface drying time and curing time are related to temperature and humidity. Increased temperature and humidity can reduce tack-free time and cure time, while low temperature and low humidity can also delay the process. MS7107 is an odorless, solvent-free, isocyanate-free, PVC-free sealant. MS7107 has the comprehensive performance of elastic sealing and certain bonding strength. It has good adhesion to many substances and requires no primer, which is also suitable for painted surfaces. This product is proven to have excellent UV resistance, so it can be used not only indoors but also outdoors.
 

Characteristics

Low VOC Ÿ
Odorless Ÿ
Non-corrosive Ÿ
Paintable Ÿ
Primerless adhesion on many substrates Ÿ
UV and weather resistant
 

 

Applications

Elastic bonding of metals and plastics, such as side panels and roof panels in car body manufacturing. Ÿ
Car/train body manufacturing, ship manufacturing, container metal structure assembly sealant
Electrical equipment, air conditioning and ventilation system manufacturing.
 

 

Technical Data

 

Items	Typical value
Properties of glue before curing:
Chemistry-based	MS-Polymer
Colors	White/Black/Gray/Yellow/Green
Curing mechanism	Moisture curing
Viscosity	Thixotropic paste
Specific Gravity	1.45
Curing characteristics:
Tack-free time(min)	5-20
Curing depth(mm,24h)	4
Performance after room temperature Curing:
Hardness (Shore A)	55
Elongation at break (%)	200
Tensile strength(MPa)	3.0
Operating temperature range (ºC)	-40~100
Short exposure to heat resistance (ºC)	120ºC
Lap Shear strength (MPa)	2.5
Compatible Substrates:
Steel	Stainless Steel
Rigid PVC	Aluminum
Polyester	ABS
Fiberglass	Glass
Acrylic-coated aluminum	Brass

 

 

Method of Application:

 

1. All surfaces must be clean, dry, and free of dust, oil, old sealant or other contamination.

2.Cartridge package: Cut seal on top of cartridge. Screw on nozzle and cut to desired bead size. Hold gun at 45°angle. Push forward, squeezing trigger to gently fill joint.
3.Sausage package: Sausage is applied with the corresponding Hand or Air pressure pistols. In the case of compressed air application, a pressure of (0.2-0.4) MPa could be tried.
4.After application before curing, the adhesive surface can be smoothed with soapy water.
5.Product can be painted; however, adaptation testing is recommended for a wide variety of paints.