Customization: | Available |
---|---|
Application: | Construction, Woodworking |
Bonding Function: | Structural Adhesive |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Suitable for structural bonding and fixation of composite materials such as SMC, FRP, CFRP, ABS, as well as bonding between composite materials and metal materials, or between metal materials.
Applicable for structural bonding between power battery cells, with excellent performance in PET film bonding, aluminum-plastic film bonding, PI film bonding, etc.
Appearance |
A | Black |
B | Light yellow | |
Vis. (mPa·s) | A | 60,000 |
B | 20,000 | |
Mixing Ratio A:B (Volume Ratio) | 1:1 | |
Mixing Color | Black | |
Mixing Density | 1.80 | |
Operating Time (min) | 6 | |
Curing Time (min) | 10 |
Thermal conductivity (W/m·K): | 1.5 |
Flame retardancy rating (UL-94): | V0 |
Shear strength (Al3003-Al3003, MPa): | 6.0 |
Shear strength (PET blue film-PET blue film, MPa): | 1.6 |
Tensile strength (MPa): | 6.0 |
Elongation at break (%): | 55 |
Hardness (Shore A): | 90 |
Recommended operating temperature (ºC): | -40 to 100 |
The surface of the adhered materials should be cleaned in advance to ensure that it is clean, dry, oil-free, and dust-free.
When using two-component cartridge products, place the product in the matching caulking gun, gently push the plunger until both components are dispensed simultaneously, and then install the mixing nozzle.
Apply the adhesive evenly and continuously during application. The adhesive may gradually cure in the mixing nozzle if left unused for an extended period.
After applying the adhesive to assembled components, quickly close and press them together to ensure that the adhesive fully wets the substrate.
Temperature significantly affects the working time and curing of the adhesive. The operating temperature should not be below 10°C, with a recommended range of 15-25°C.
Heating can accelerate curing; choose appropriate conditions based on actual sample experiments.
Unused adhesive should be stored in a sealed state for future use. When resuming application, replace the mixing nozzle with a new one.
Nanjing Howell New Material Technology Co., Ltd.
Room 501, Unit 7, Xingzhihui, Xinghuo Rd 19th, Jiangbei New District, Nanjing, (211899), Jiangsu, China.
Acsic Ingredients, LLC.
Add: 565 Metro Place South STE 300 Dublin, OH 43017.
Factory:
No.1008, Panshan Village, Lipu Town, Zhuji City, Shaoxing City, Zhejiang Province, China.