HM-SS5564 Room temperature vulcanized silicone (RTV) sealant, instead of gaskets, easy to use, can meet the requirements of on-site forming curing, production and maintenance. Using a new environmental protection formula, non-toxic, low odor curing into the gasket performance has the characteristics of temperature resistance, oil resistance, corrosion resistance, is a new generation of green environmental protection excellent performance alternative gasket sealant. Widely used in automobile, motorcycle, Marine and mechanical equipment engine, transmission, gear box, axle plane seal, is your best choice to solve the problem of plane seal assembly and maintenance.
Previously, the joint surface seal was sealed with solid gaskets, such as paper gaskets, asbestos gaskets, steel gaskets, etc. The use of solid gaskets, due to the effect of stress, or gasket infiltration, a long time will occur leakage problems.
Now, in order to completely solve the problem of leakage of the joint surface, we choose anaerobic flat sealant, or silicone sealant, instead of solid gaskets, to seal. This product has high bonding strength, good immediate sealing, good oil resistance, high and low temperature resistance, good weather resistance, pressure resistance and other excellent properties.
|
| Performance |
Indicator |
| appearance |
Grey paste, acid |
| Surface drying time (h) |
5~10min |
| Seal clearance |
≤4mm |
| Complete curing time (humidity 50±5%, temperature 23±2ºC) |
≤20h |
| Elongation |
≥300% |
| Hardness |
30±5HA |
| Operating temperature |
-40∽+280ºC |
| Seal pressure |
≥10MPa |
| Usage |
1, Pretreatment: If you want to obtain the best bonding performance, the substrate surface needs to be clean and grease free treatment;
2, Sizing: On the clean substrate surface, the product is coated into a sealant line, assembly parts within five minutes. Press the parts so that the adhesive is evenly distributed and the fitting surface is fully filled;
3. Curing: the bonding point should be fully cured before bearing a large load. The curing speed depends on ambient humidity and temperature.
4. If there is overflow, it can be erased with non-polar solvent
|
| Sizing equipment |
1. Hand-held sizing gun
(1) For 50 ml and 300 ml packages of branched products: hand-held equipment sizing gun
To meet the manual operation of all 50 ml and 300 ml packages of branched products
(2) The rapid response load system makes the barrel product more reliable and clear in the sizing process
Clean and easy
2. Loctite pneumatic sizing gun
(1) Hand-held sizing gun for all 300 ml packages of branched products and 50 ml
Packaged tubular products
(2) Integration of pressure regulation systems
(3) Rapid pressure regulation to reduce the adverse effects of residual pressure
3. Use an edger
For 70 ml aluminum tube packaging products, unscrew the cap, puncture the opening, and roll up the end of the toothpaste aluminum tube with a crimper to squeeze out the sealant.
|
| Typical Applications |
Mainly used for flange sealing, with excellent oil resistance and large movement of adhesive contact, such as stamping metal cover (such as timing gear cover, oil pan, engine)
|
| Package/Storage |
Packaging:
300ml/ piece, 70ml/ piece, 50ml/ml
Color: black, gray, silver black, silver gray.
Storage and Shelf Life:
Store the original sealed adhesive in a dry place with a temperature not exceeding 27 degrees. The storage period is 12 months from the date of production
|
|
){kind=link}